Tips on Recording High Quality Audio

Hi everyone, my name is Sam and today we’re going to talk about some tips for recording high-quality audio. There are a lot of different steps and tips that you can use to create your next masterpiece. Let’s get started!

Over the course of recording audio, there are a multitude of things that you need to keep in mind. Some are technical and some aren’t, but all play an important role in recording really high-quality audio. Before we can talk about sound, you are going to need to understand some basic technicalities.

Audio Recording Basics

Before you start recording, make sure that your audio device and computer are set up for recording. This includes the mic and any software. If you’re using a PC there are apps that let you use your computer like a recorder instead of a mouse, keyboard or speakers. These apps are specifically meant for recording audio.

Learn more recording tips, How to Make Your Guitar Sound Awesome in the Studio

You should also new what the bit rate of your audio is. This is the amount of information that can be communicated in one space, usually measured in bits per second. The higher the bit rate, the better the quality of sound you are going to hear. This is also determined by what kind of device you are recording on.

Also make sure that your sample rate is set to a high value. This measures the number of samples used per second to represent the waveform and changes it into an audio signal. A higher sample rate means more precision and better sounding audio.

Use A Proper Recording Space

Once you have your audio set up, you need to make sure that you are recording in a place that has good acoustics. This means that the room or area has a nice sound to it. Maybe it’s quiet or spacious, but there is something special about it. There are certain rooms where musicians perform due to the sound of the room. Consider recording in a more natural space, like an open room with carpet and not too many objects around. If you are recording a video or podcast, find the right kind of space for the right kind of sound.

Use Proper Microphones

The microphones that you use to record your audio are just as important as your recording space. If they are not properly made, they will alter the sound drastically. So what makes a good microphone? Well there are three main requirements: frequency response, impedance and sensitivity. These all contribute to the quality of sound and how it is picked up by your microphone.

Another factor is how much you are going to be recording. If you are doing a full album, then you are going to need something that can handle a lot of sound. This will allow your recordings to have a lot more clarity and detail than they would otherwise.

Low Frequency Microphones

If you are recording in an area with low frequencies, then you should use a microphone that has really high sensitivity and sensitivity (SD) . This means that it will pick up the low frequency sounds much better than other microphones. SD is a very important measurement and you should always be paying attention to that number when you are shopping around.

Record In Mono

Mono is another term you should be aware of while creating your audio project. There are two different types of microphones: stereo and mono. Stereo microphones pick up sound in two different channels (left and right). This gives it a more defined sound than mono, but it is also harder to mix since the sounds might not fit together as well. When you’re recording in mono, then you can make the two channels sound a lot better when placed together.

If you are recording in a space where the sound will be too low or high, then you should consider a condenser mic rather than an electret or dynamic mic. These will pick up more of the high or low frequencies and let your audio project sound more balanced. You can also use these microphones to record vocals since they pick up very good quality sound.

Recording Tips

Now that we have gone over the technical stuff, it’s time to look at some of the things that you can do to make your audio sound better. This will involve finding a good space and recording in mono or stereo. Also pay attention to the microphones you use and how they affect the audio and how much detail it has. Here are some tips:

Anchor Yourself

While recording, you need to be as still as possible. This is going to help with the audio quality and give you a clearer and more defined sound. There will be times when you might have to do different things during your audio project, but whenever possible, try to keep yourself still.

Raw Audio Is Key

You also want to record the raw audio without any processing or editing beforehand. The best way to do that is by recording separately and then mixing everything together afterwards. This gives you more control over the sound and is necessary to get a clear and crisp recording. However, there are those that prefer to record in one take, but that takes more skill and practice.

Watch For Quality Equipment

You can improve the quality of your recordings greatly by upgrading your equipment. This includes microphones and speakers, etc. Always look at the quality before making a purchase because trying to fix poor audio is much harder than getting good audio in the first place.

Noisy Locations

If you are recording in an area with a lot of noise, such as traffic or a busy street, then you need to worry about how that will affect the audio. One way to get around this is to use noise canceling microphones. These use active noise cancellation technology and can handle most of these problems. However, if you are recording something like a concert or other live music events, then you have no choice but to record in a noisy area.

Learn What To Consider When Choosing A Digital Audio Workstation

EQ The Audio

Finally, the most important thing to remember is that you should always be using equalization. This process makes it so you can alter the audio and make it sound more like you want it to. You can make small changes to the highs, mids and lows in your audio file to add clarity and get rid of any unwanted noise that might be in there. The simpler the better, so don’t over complicate things with your adjustments because this will make your work harder to manage.

Conclusion

As you can see, there are a lot of things to think about when you are recording your audio. This might seem like a lot at first, but once you learn how to do it right, it will become second nature. The most important thing is to focus on your overall sound and get the best quality possible. By paying attention to all of the above steps, you can make fixing audio much easier and less of a headache for yourself down the road.